Electrolux 137221600 Washer Drain Pump Kit by Seentech - Compatible for KENMORE Frigidaire Washer - Replace 137108100 AP5684706 134051200 134740500 134740800 137108100 137151800

Quality product. Just what I needed along with a YouTube video on how to make the replacement. Washer working great. Probably saved hundreds of dollars by not having to call a repairman.

Installed the pump in a 1998 Frigidaire front loader 417.39012891. Which called for pump no 137108000 With these old machines one cannot always expect complete plug and play. This unit had the outlet tube on the wrong side. Fortunately by undoing 3 screws you can rotate the outlet tube 180 degrees to the right location. It is designed to do that. The electrical connecter fitted perfectly once I realized that I was trying to insert it upside down! Then I discovered that the supplied mounting foot was too short for the existing mounting holes in the washing machine. So I took the mounting foot off the old pump which attached to the new pump after I filed off a little material which interfered with the proper fitting of the foot. I could have simply drilled new holes in the base of the machine alternatively. Once installed everything worked perfectly and I saved over $100 in parts cost and who knows what in the technician home visit expense. Another five star product all things considered.

It fits a kenmore washer, but in the end my machine is old and the turbine is rusted to the transmission.

Knowing that this isn't an OEM part, I'm conflicted on whether to give it three or four stars. Once installed, it works just fine, although I've only done three loads so I can't pass judgement on the longevity. The issue with the install is that there is almost no clearance to install the left (as you face the pump) mounting sheet metal screw. The OEM pump I removed had clearance for a socket wrench to remove the sheet metal screw, but on this one, the valve body extends over the screw. Getting the screw into the hole in the bracket was a puzzle, and I had to use a 5/16" open-end wrench to tighten the screw, one quarter turn at a time, which was not ideal. Also, you have to install the mounting bracket onto the pump body, removing one screw from the pump body and using it and a supplied self-tapping screw to attach the mounting bracket to the pump body. No big deal, but if I hadn't had the old pump to look at, it would have been difficult to figure out. Instructions would have been nice. All that said, given the savings of $125 vs. an OEM pump, and given that it works and works quietly, my complaints are more like quibbles.

Fit perfectly in my Frigidaire Affinity washer. Not something I would recommend an amateur to attempt, the way it goes in is difficult at best. Some tips: Use a large screwdriver or wedge to elevate the front of the washer to get better access to the front panel screws. Have a wet/dry shop vac to suck up the water as you slowly remove the discharge hose off the pump. Take the trap completely off the tub and empty the button trap of debris. Loosely attach the left mounting grommet to the floor of the cabinet first, then slip the pump in place and attach the right one, then finish tightening the left. Pop the splash guard up to get easier access to the electrical plug on the rear of the pump. Check the struts, if one is broken, the tub can hit the pump during the spin cycle which likely broke it in the first place.Remember, if the women don't find you handsome, they better at least find you handy.

The item arrived quickly. It was of similar quality and design. Fit was perfect. Very easy installation. I highly recommend the item. At the price point, if it lasts a year or more. I am good with that. Original made 10/15. It seems of similar quality and design. I don't forsee any issues.

Second time I had to replace this part, much cheaper than replacing the complete washing machine. Newer machines don't last that long. So glad I can still get parts to fix the older,better machines

The pump worked, although for my model washer (2009 Frigidaire/Electrolux front loader, Model FTF530FS, Part No. 134740800), we had to put the pump in reverse of how it was originally and had to improvise a couple things: the bracket that affixes the pump to the washer bottom was too short for the washer screw holes so I used the original bracket – but doing that meant I could only affix the pump to the bracket with ONE screw instead of two (and HINT: affix pump to bracket BEFORE screwing bracket onto washer bottom, or else you can't get a screwdriver to it!) Having to reverse the motor also made it difficult to get to the left bracket screw – needed a little socket wrench instead of a screwdriver. Finally, the plastic cover for the pump didn’t seem to accomplish anything once the new pump was in (on the original, the plastic shielded the motor much better). Hopefully it will work for a long time!!