XXGO4 Pcs Diamond Oscillating Multi Tool Blades for Removing Grit Grout XG4202S

Great quality and value , works very good

I'm removing old grout from the floor of a tiled shower. 4'x7' with 1" tiles, so tons of grout to remove. Too big of a job for this blade, but I used an angle grinder for the vast majority. This tool attached to my Makita oscillator was perfect for getting the last inch or so against the walls where I couldn't reach with the circular blade without damaging the wall tiles. Made quick work of the grout, but the blades are thin so you have to use care not to put too much pressure on the tool while cutting. Let the tool and the blade do the work. One blade bent while i was using it, but I was able to straighten it out and continue using it. All in all I cut about 30' of grout in 1.5" increments around the perimeter of the shower. First blade dulled. Switched to the second to finish up. Still some life in the second blade. I used the rectangular blades for short runs and the arc blade for longer runs. Do not was your time on the carbide blades. Bought one at the warehouse store for twice as much as this pack of 4 and it lasted 5 minutes. good luck with your project

I was a bit messy with tile and allowed thinset to build up where the tile leveling system clips were. I used this to cut the thinset out from between the tiles before grouting. These cut through the plastic leveling clips as well. For less than the cost of one grout blade at the local hardware store I got four blades. Over 200 sq ft of tile I used one blade until it was completely used up. Then I used another blade for the remaining ~50 sq ft of grout lines. Great value.

I used these in two different applications. The traditional flat style easily removed grout from between tiles, prior to demolition - and did a great job. I used the tomahawk style to cut some HardieBacker - and although it required multiple passes - it gave a nice clean cut. Overall - no complaints - both blade styles worked like a charm!

These 4 Pcs Diamond Oscillating Multi Tool Blades boast durability, but their effectiveness in removing grit grout leaves much to be desired. While they handle softer materials adequately, tackling tough grout proved to be a struggle, often requiring multiple passes and excessive effort.

Made easy work of removing tile grout in tight spaces.

sturdy enough for light duty work.

great price perfect for cutting plaster or grout

I used this to remove old thinset , grout and cement with my multitool. Great performance.

Muy prácticos

Pour un usage professionnel. Pour vider du coulis de céramique

These blades do a Great job at doing what they are designed for - removing grout between tiles.Removing grout is a messy, slow process in the best of times and these blades are specifically designed for that. They are not designed for cutting tile or trimming. using it for this would dull the blade immediately or quickly.A set of 4 for $23 CAD is a bargain.

Joints de briques sur maison centenaire.